SAE J2435_201508

The SAE Standard covers normalized electric resistance welded flash controlled single-wall, carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for cold forming, welding and brazing. Material produced to this specification should not be used for single flare applications due to the potential leak path that would be caused by the ID weld bead or scarfed region. Assumption of risks when using this material for single flare applications to be defined by agreement between the producer and tube purchaser. The grade of material produced to this specification is higher in carbon and manganese content than the grade of material specified in SAE J356 and is intended to service higher pressure applications than equivalent sizes of SAE J356. Due to the higher carbon and manganese content the forming characteristics of the finished tube are diminished versus the SAE J356 product. Special attention to the overall forming requirements of the finished assembly shall be taken into consideration when specifying material produced to this specification. In an effort to standardize within a global marketplace and ensuring that companies can remain competitive in an international market it is the intent to convert to metric tube sizes which will: Lead to one global system Guide users to preferred system Reduce complexity Eliminate inventory duplications This five year review of the J2435 standard incorporates revisions requested by producers, fabricators and users of this material type. The updates include the following: A revised documents listing, Verbiage changes to improve the technical meanings of specific terms and expressions Revised wording of section 5.2 A recommendation for the use of metric size materials. Revision of chemical requirements to harmonize with SAE J403 Added notation to clarify test agreement noted on 8.8 Pressure Proof Test Added notation to clarify test note on 8.9 Nondestructive Electronic Test