TS EN 15167-1
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
This European Standard specifies requirements for the chemical and physical properties as well as
quality control procedures for ground granulated blastfurnace slag for use as a type II addition in the
production of concrete, including in particular cast-in-situ or prefabricated structural concrete
conforming to EN 206-1. Ground granulated blastfurnace slag conforming to this European Standard
may also be used in mortars and grouts.
Ground granulated blastfurnace slag containing any added materials other than grinding aids, is not
within the scope of this European Standard. It is also not within the scope of this European Standard
to specify provisions governing the practical application of ground granulated blastfurnace slag in the
production of concrete, mortar or grout, i.e. requirements concerning composition, mixing, placing,
curing etc. As regards such provisions, reference should be made to other European or national
standards, such as EN 206-1.
Available Formats:
- Availability: Immediate Download
- Language: English
- License Type: Single User
- Updates: Not Included
- Availability: Request Quote
- Language: English
- License Type: Enterprise / Multi User
- Updates: Included
About This Item
TS EN 15167-1 is the standard that sets out definitions, specifications and conformity criteria for ground granulated blast furnace slag used in concrete, mortar and grout. Its focus is the chemical and physical characteristics that make this material suitable as a type II addition, especially in cast-in-situ or precast structural concrete conforming to EN 206-1, together with the associated quality control approach.
In general technical terms, ground granulated blast furnace slag is produced by rapidly cooling molten blast furnace slag to form a granulated material, then grinding it to a fine powder. In concrete technology, such mineral additions are part of the binder system and can influence strength development, workability and long-term performance. This standard, however, does not govern concrete mix design, placing, curing or other site application practices.
What the standard deliberately leaves out
- Materials containing added constituents other than grinding aids are excluded.
- Practical provisions for composition, mixing, placing and curing are outside the scope.
- The structural concrete context linked to EN 206-1 is explicitly referenced.
- Conformity criteria and quality control procedures are part of the document.
- The same compliant material may also be used in mortars and grouts.
As a result, TS EN 15167-1 helps define the product identity of ground granulated blast furnace slag and the technical basis for judging conformity, while leaving application rules to EN 206-1 and other relevant European or national standards.
- Publication Date: 21.12.2006
- Standard Status: U (Yürürlükteki Standard/Standard)
- Publisher: TSE
- Document Language: tr
- ICS Classification: 01.040.91 Yapı Malzemeleri ve Yapılar (Terimler); 91.100.15 Mineral Malzeme ve Ürünler
- Pages: 23
- Source Standard: EN 15167-1:2006
- International Equivalents: EN 15167-1-EQV; DIN EN 15167-1-EQV; BS EN 15167-1-EQV; NF P18-512-1, NF EN 15167-1-EQV
Need This Standard?
Request a personalized quote today to receive the latest edition in PDF or other available formats.
Need This Standard?
Request a personalized quote today to receive the latest edition in PDF or other available formats.
Summarize with AI
Get quick summaries using your favorite AI engine.
Online Standart Disclaimer
OnlineStandart.com is an authorized reseller of international standards, operating through partnerships with authorized distributors. We do not own the copyrights or trademarks of the standards we sell, including but not limited to those of API, ASHRAE, BSI, SAE, ASTM, IEEE, IEC, ASME, ISO, and others.
All product names, logos, and brands are the property of their respective owners and are used for identification purposes only; their use does not imply endorsement. OnlineStandart.com is not affiliated with or endorsed by any standards development organization unless explicitly stated. The content of this document is for informational purposes only and is intended to promote our licensed reselling services.
Online Standart does not host, distribute, or link to free, unlicensed, or uncertified copies of copyrighted standards. Every document we deliver is a licensed copy obtained through authorized channels and supplied with full licensing documentation. The “Free PDF Download” option on our product pages refers to this free informational document — never to a free copy of any standard.